Star Trac S-UBX - Manual (Page 17)

17
620-7992 Rev 001
S
ETTING
U
P
Y
OUR
P
ERSONAL
V
IEWING
S
CREEN ( NTSC / ATSC)
Basic Operations
Turning On / Off the Power
Selecting the Input Signal Source
Channel Selection
Turning On
Press the button on the control module, the unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, press the button on the control module to turn off the unit.
Note:
•
When selecting AV mode, the button can not work. If you want to turn off the unit, please select TV
mode first.
•
In TV mode, when there is no signal input for 30 seconds, the unit will turn off the back light automatically.
Once you press any button (except button) on the control module or the unit receives a signal input,
the unit will display normally.
•
In AV mode, when there is no signal input for 3-5 seconds, the unit will turn off the back light automati-
cally. When you press VOL+/- button or the unit receives a signal input, the unit will display normally.
Press the ‘7’, ‘8’, and ‘9’ buttons simultaneously to toggle between input sources. Options include:
•
TV - Watch TV.
•
iPod - Listen to your iPod or watch a movie or other video from your iPod on the PVS screen.
•
USB - Listen to music from your USB device.
You can use the following ways to change channels:
•
Press CH+ or CH- to go to the next or previous channel. The skipped channels can't be selected.
•
Press the number buttons to directly select any channel you want.
•
To go to the previous channel viewed, press the button.