Samsung 8.9 - Manual (Page 25)

Understanding Your Device 21
• Settings: Touch to open the Settings application. For more
information, refer to “Settings” on page 120.
2. Touch a notification entry to display the details or touch X
next to a notification of remove it.
3. Close the Quick Settings by touching X in the upper right
corner of the Quick Settings pop-up or by touching any
other part of the screen.
Status Bar
The Status Bar displays icons to show network status, battery
power, and other details.
Battery Level: Shown fully charged.
Charging Indicator: Battery is charging.
Device Power Critical: Battery has only three percent
power remaining. At about 15 percent power
remaining, a popup is displayed to remind you to
charge immediately.
USB Charging Indicator: The device is connected to a
computer using a USB cable, but it is not charging. The
battery is only charged while connected to a computer,
if the device is turned off. When the device is off, press
the Power/Lock key to see the battery charging
indicator.
Signal Strength: Displays your current signal strength. The
greater the number of bars, the stronger the signal.
USB Cable Connected: Displays when the device is
connected to a computer with a supported USB cable.
Displays when your connection to a UTMS, HSDPA, HSPA,
or HSPA+ network is active.
Displays when your tablet is communicating with the
UTMS, HSDPA, HSPA, or HSPA+ network.
Displays when your connection to a 4G LTE network is
active.
Displays when your tablet is communicating with the 4G
LTE network.
USB Debugging: Device is connected to a computer in
debugging mode. For more information, refer to “USB
Debugging” on page 134.