SMC Networks EZ-Connect SMCWIPCAM-G - Manual (Page 48)

38
are two choices: Infrastructure mode and Ad-Hoc
mode.
- SSID: SSID (Service Set Identity) is the name assigned
to the wireless network. It will auto-detect and display
the SSID of wireless network connected in this box.
This default setting will let the camera connect to ANY
access point under the infrastructure network mode.
- Channel: This pull-down menu provides the wireless
channel for communication. A “channel” is a range of
frequencies to be used in communication between the
camera and access point in Infrastructure mode, or the
camera and PC/Notebook in Ad-Hoc mode. Select the
appropriate channel from the list provided depending on
the regulatory region where the unit is sold.
- Security Mode: Wireless network communications can
be intercepted easily. This option will help you protect
your wireless network.
- Authentication: Open communicates the key across the
network. Shared allows communication only with other
devices with identical WEP settings.
- Encryption Mode: This option allows you to configure
the setting of data encryption. The WEP key must be set
before the data encryption is enforced.
- Key Format: To enable WEP Encryption, you should
decide the encryption format first by selecting the
ASCII or HEX option, and then input the WEP key (in
the following Key 1~4 box).
- Pre-Shared Key: This is used to identify each other in
the network. Enter the name in the Pre-Shared Key box,
and this name must match the Pre-Shared Key value in
the remote device.