Hardware installation, Attaching the metal clip, 2 . h a r d w a r e i n s t a l l a t i o n – SMC Networks EZ-Connect SMCWIPCAM-G User Manual
Page 22: Ttaching the, Etal, Ardware, Nstallation
12
2
H
ARDWARE
I
NSTALLATION
Attaching the Metal Clip
Ear
Ear
Screw
Wall screw
Screw
Base of the camera
Wall screw
To attach the metal clip, remove the two rubber pads under the
base of the camera firstly. Place the metal clip onto the camera
base, and align the two holes of metal clip with two screw holes
on the camera base. Then, secure the metal clip with two screws
(provided in the package). There are two ears on each side of the
metal clip, allowing the camera to be mounted on the ceiling or
wall using two wall screws (provided in the package).