Specifications, Ref e renc es – Sharp MD-MT888H User Manual

Page 62

01/8/30 6.fm

MD-MT888H

Ref

renc

-S

pec

ifications-

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang-
es for product improvement without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in individual units.

Power source:

DC 5 V:

AC adaptor (AC 230 - 240 V, 50/60 Hz)

DC 1.5 V:

Commercially available, "AA" size (LR6), alkaline battery x 1

DC 1.2 V:

Rechargeable Nickel-Metal Hydride battery AD-N55BT x 1

DC 1.5 V:

Optional car adaptor, AD-CA55X (for cars with a 12-24 V DC negative
earth electrical system)

Power consumption:

7 W (AC adaptor)

Output power:

RMS: 10 mW (5 mW + 5 mW)
(0.2 % T.H.D.)

Charging time:

Approx. 3.0 hours (90 %)
Approx. 5.0 hours (fully charged)

Dimensions:

Width: 71.9 mm (2-27/32")

Height: 15.7 mm (5/8")

Depth: 78.9 mm (3-1/8")

Weight:

128 g (0.28 lbs.) with rechargeable battery

Input socket:

Line/optical digital, microphone (powered by the main unit)

Output socket:

Earphones (impedance: 32 ohms)/remote control unit

Type:

Portable MiniDisc recorder

Signal readout:

Non-contact, 3-beam semiconductor laser pickup

Audio channels:

Stereo 2 channels/monaural 1 channel

Frequency response:

20 - 20,000 Hz ( 3 dB)

Rotation speed:

Approx. 400 - 1,350 rpm

Error correction:

ACIRC (Advanced Cross Interleave Reed-Solomon Code)

Coding:

ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type

Recording method:

Magnetic modulation overwrite method

Sampling frequency:

44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)

Wow and flutter:

Unmeasurable (less than 0.001 % W. peak)