Sharp MD-MT888H - Manual (Page 48)

01/8/30 5.fm
48
MD-MT888H
Ad
v
a
n
c
e
d
Fe
at
ur
es
-E
dit
ing a
Recor
d
ed Mini
Disc-
Editing a Recorded MiniDisc (continued)
„ Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc, group, and track names) of the master MiniDisc to
another MiniDisc (for stamping) simultaneously.
Notes:
z When information of the non-grouped MD is stamped
on the group-recorded MD, the disc and track names
will be stamped properly. However, the group informa-
tion will be erased.
z When information of the group-recorded MD is
stamped on the non-grouped MD, tracks will be
grouped automatically.
Master MiniDisc operation
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
1
Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2
Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
3
Move the M button toward
or to select "E(EDIT)"
and press it.
4
Move the M button toward
or to select "N(NAME
STAMP)" and press it.
5
Press the M button.
6
When the unit displays
"CHANGE MD", remove the
master MiniDisc.
Remove it without turning off the power. Or, the opera-
tion will be cancelled.