Sharp MD-MT888H - Manual (Page 59)

01/8/30 6.fm
59
MD-MT888H
Ref
e
renc
es
-E
rr
or M
ess
a
g
es
-
Error Messages
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BLANK z Nothing is recorded.
(Replace the disc with a recorded disc.)
busy z A track is being moved.
Can'tC z You tried to record from a copy prohib-
ited MiniDisc.
z You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
Can'tE z A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can'tL z You tried to record or edit the MD
whilst operating the OPEN lever.
Can'tP z Cannot play the MD.
Can'tR z Recording cannot be performed cor-
rectly due to vibration or shock.
Can'tS
Can'tT(*)
Can'tU z The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
ERROR MES-
SAGES
MEANING
Can'tSTAMP z Stamp function does not work.
(Check the number of tracks.)
Can'tW z Cannot save the TOC information cor-
rectly to a MiniDisc.
CH
(displayed on
the main unit) z You tried to operate whilst charging.
D-FULL z The disc is out of recording space.
DEFECT z The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
Er-MD (**) z The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)