Sharp XG-C60X - Manual (Page 53)

Basic Operation
-49
Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Note
•
If a memory has not been set, a resolu-
tion and frequency setting will not be dis-
played.
•
When selecting a stored adjustment set-
ting with “Select Setting”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in “Special Modes” on
the “Fine Sync” menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting “Special
Modes” in the “Fine Sync” menu on the
menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Note
•
Avoid displaying computer patterns which
repeat every other line (horizontal stripes).
(Flickering may occur, making the image
hard to see.)
•
When a DVD player or Digital Video is con-
nected, select 480P as the input signal.
•
See “Checking the Input Signal” below for infor-
mation on the currently selected input signal.
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Note
•
The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digi-
tal Video.
XG-C60X_E_PDF_p42_50.p65 03.8.28, 2:09 PM 49