Sharp XG-C60X - Manual (Page 20)

-16
Connecting the Projector to Other Devices
Before Connecting
Note
• Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the
devices to be connected. After making all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
A computer using:
■ An RGB cable and a computer audio cable (commercially avail-
able) (See page 17 .)
■ A DIN-D-sub RS-232C adaptor and an RS-232C serial control
cable (commercially available) (See page 22 .)
Component video or audio-visual equipment:
■ A VCR, Laser disc player or other audio-visual equipment
(See page 19 .)
■ A DVD player or DTV* decoder (See page 20 .)
*DTV is the umbrella term used to describe the new digital television
system in the United States.
An amplifier or audio components using:
■ An audio cable (commercially available) (See page 21 .)
A monitor using:
■ An RGB cable (See page
23 .)
■ A computer RGB cable (commercially available)
(See page 23 .)
XG-C60X_E_PDF_p15_18.p65 03.9.14, 4:14 PM 16