Sony CMT-DC500MD - Manual (Page 17)

17
MD — Play
5
To program additional tracks, repeat
steps 3 and 4.
6
Press MD u (or N on the remote).
To Do this
Select the desired track
using the number
buttons on the remote
Press MD . or >
repeatedly during Program
Play.
Press DISPLAY on the
remote in stop mode. The
last programed track
number appears, followed
by the total number of
programed steps.
Press MD x, then press
PLAY MODE/
DIRECTION (or PLAY
MODE on the remote)
repeatedly until “PGM” and
“SHUFFLE” disappear
from the display.
Do steps 3 and 4 with
program play stopped.
Check the program
order
Check the total number
of programed tracks
Cancel Program Play
Add a track to the end
of the program
Erase the last
programed track Press CLEAR on the
remote in stop mode. Each
time you press the button,
the last programed track is
erased.
Press number buttons
instead of performing steps
3 to 5. To use number
buttons, see page 16.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, switch
the function to MD, and press MD u (or N on
the remote).
• “---.--” appears when the total MD program time
exceeds 1000 minutes.
Using the MD display
Press DISPLAY on the remote repeatedly.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track t Current track number and
remaining playing time of the track t
Remaining playing time of the entire MD t
MD track title*
1 t Clock display t BASS
level t TREBLE level t Current track
number and elapsed playing time of the track
t …
While the MD is stopped
Total number of tracks and total playing time* 2
t Remaining recordable time (only for a
recordable MD) t MD disc title*
1 t Clock
display t BASS level t TREBLE level t
Total number of tracks and total playing time*
2
t …
* 1 Nothing appears when no disc or track title is
labeled.
* 2 “---.--” appears when the total MD program time
exceeds 1000 minutes.
Tip
You can check a track title at any time during play. If
you press SCROLL on the remote, a track title
appears scrolling in the display.
Press SCROLL on the remote at any point during the
scroll display to stop the scrolling. Press SCROLL on
the remote again to restart the scrolling.