Sony CMT-DC500MD - Manual (Page 11)

11
CD
Other operations
To Do this
Stop playback Press CD x.
Pause Press CD u (or X on the
remote).
Press again to resume
playback.
Select a track Press CD . or >
repeatedly until you find the
desired track.
Find a point in a track During playback, press and
hold CD m or M until
you find the desired point.
Remove the CD Press CD Z.
Tip
You can start playing from the desired track in
Normal Play or Program Play.
Press CD . or > repeatedly until the desired
track appears in step 2.
Or, press the number buttons on the remote. The
playback automatically starts.
Play repeatedly
(Repeat Play) Press REPEAT repeatedly
during playback until
“REPEAT” or “REPEAT
1” appears in the display.
REPEAT: For all the tracks
on the CD up to 5 times.
REPEAT 1: For only the
currently playing track up
to 5 times.
To cancel playing
repeatedly, press REPEAT
repeatedly until “REPEAT”
and “REPEAT 1” disappear
from the display.
To enter track number over 10
(on the remote only)
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.