Input point module (afi5100), Product description, Product numbers – Siemens AFI5100 User Manual
Page 5: Prerequisites, 1 product description, 2 product numbers, 3 prerequisites
Input Point Module (AFI5100)
1
Input Point Module (AFI5100)
Fig. 1
Input Point Module
1.1 Product
Description
The AFI5100 is an Input Point Module used as part of a Siemens integrated access
control and security solution. It provides an interface between an Advanced Access
Controller (ACC) and up to 32 input devices used to monitor a secure facility.
The AFI5100 continuously monitors the status of all input devices connected; for
example, Passive Infrared Detectors (PIRs). Any changes in state are instantly
communicated to the ACC and then on to the Host system if necessary.
1.2 Product
Numbers
6FL7820-8CB10 AFI5100 – Input Point Module and base-plate
1.3 Prerequisites
Input Devices to be connected to the IPM
Cabling (RS-485)
Required Tools & Materials
Medium-duty drill and associated drill-bits (if required)
4 mounting screws or standoffs (approx. 4mm)
Flat-blade terminal screwdriver
Wire cutters
Cable strippers
5
Siemens Building Technologies
Fire Safety & Security Products
02.2005