Sony KDP 65XBR2 - Manual (Page 76)

Using the Projection TV Menus
66
i.LINK Standby
Allows you to
manage standby
power
consumption On Allows the i.LINK signal to pass through to
connected i.LINK devices even when the
projection TV is turned off. Front panel LED
is orange. The projection TV uses more
standby power than when this option is set
to Off.
Off Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the projection TV is turned off. Front panel
LED is red. The projection TV uses less
standby power than when this option is set
to On.
Set Clock/Timers Select to set the clock and to program your DTV to turn on
and off at two scheduled viewing times. For details, see
page 49.
Demo Runs a demonstration of the features of the DTV.
Factory Reset Restores all menu options to their original factory settings.
WARNING
: Factory Reset clears all settings from
memory, including channel lists, favorite channels, menu
settings, timers, clock, etc.
Option Description
For details about power
consumption in standby
modes, see page 78.
z
You can also access the Timer
using the TIMER button on the
remote control.
z