Sony KDP 65XBR2 - Manual (Page 65)

Using the Projection TV Menus
55
Speaker Setup Speaker Select to control which of the projection TV’s
speakers are active. Select from
Front/Center/Rear, Front/Center, and Off.
Subwoofer Select whether you are using a powered
subwoofer (Yes) or not (No).
Test Tone You can use the test tone to compare the
speaker output levels. Use Center Level/Rear
Level and Front Balance/Rear Balance to adjust
the levels while the test tone is on. When you
select On, a test tone is output from each
speaker, as follows:
If Speaker is set to Front/Center/Rear:
If Speaker is set to Front/Center:
To turn off the test tone, press MENU or EXIT.
(Available only when Effect is set to Dolby
Surround and Speaker is set to Front/Center/Rear or
Front/Center.)
Center Level Select to adjust the relative volume level of
the center speakers. (Available only when
Effect is set to Dolby Surround and Speaker is set
to Front/Center/Rear or Front/Center.)
Rear Level Select to adjust the relative volume level of
the rear speakers. (Unavailable if Speaker is set
to Off or Front/Center.)
Front
Balance Select to adjust the left to right balance of the
front speakers. (Unavailable if Speaker is set to
Off.)
Rear Balance Select to adjust the left to right balance of the
rear speakers. (Unavailable if Speaker is set to
Off or Front/Center.)
Subwoofer
Level Select to adjust the relative volume level of
the subwoofers. (Unavailable if Speaker or
Subwoofer is set to No.)
Alternate Audio Cycles through the available audio tracks for the current
program. (For example, a sporting event that broadcasts
multiple commentators.)
Option Description
No test tone is output from
the subwoofer.
z
Left t Center t Right t Right Rear t Left Rear
Left t Center t Right