Sony KDP 65XBR2 - Manual (Page 41)

Setting Up the Projection TV
31
Connecting Cables
1 Using an A/V cable, connect the i.LINK device’s Audio and
Video OUT jacks to the projection TV’s Audio and Video IN
jacks.
2 Using an i.LINK cable (see page 30), connect the device’s i.LINK
jack to either of the projection TV’s i.LINK jacks.
✍
Before connecting this unit to i.LINK-compatible equipment, see the instruction
manual of the i.LINK device to be connected.
DIGITAL
AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
1
2
i.LINK cable
TV
Sony digital cable
A/V cable
set-top box
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
✍
i.LINK devices can be “hotplugged” (connected and disconnected while they
are still powered on). The projection TV automatically recognizes the device
and displays the screen shown on page 33.