23 connecting a satellite receiver – Sony KDP 65XBR2 User Manual
Page 33
Setting Up the Projection TV
23
Connecting a Satellite Receiver
1
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2
Using an A/V cable, connect the satellite receiver’s Audio and
Video OUT jacks to the projection TV’s Audio and Video IN
jacks.
3
Connect a coaxial cable from your cable or antenna to the
projection TV’s CABLE jack.
✍
If the receiver you are connecting has an S VIDEO jack, you can use an S VIDEO
cable for improved picture quality (compared to a combination audio/video
cable). Because S VIDEO cables carry only the video signal, you will also need
audio cables for sound.
TV
Satellite receiver
Satellite
cable
A/V cable
Coaxial
cable
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
antenna
This manual is related to the following products: