Sony KDP 65XBR2 - Manual (Page 25)

Setting Up the Projection TV
15
Rear Panel
Connection Description
1 VHF/UHF Connects to your VHF/UHF antenna. VHF/UHF is the digital TV antenna input.
2 CABLE Connects to your cable source.
3 S VIDEO IN 1/3/4 Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped
video component. Provides better picture quality than the VHF/UHF jacks or
the Video IN jack.
4 VIDEO IN 1/3/4
VIDEO/L(MONO)-AUDIO-R Connect to the audio and video OUT jacks on your VCR or other video
component. A 6th video input (VIDEO 2) is located on the front panel of the
projection TV. The Audio and Video IN jacks provide better picture quality
than the VHF/UHF IN jack.
5 SELECT OUT Connect to the audio and video IN jacks on your VCR or other video
component. The output signal is determined by the SELECT OUT setting in the
Setup menu (see page 65).
6 HD/DVD IN
(1080i/720p/480p/480i)
VIDEO IN 5/6 Connect to your DVD player’s or digital set-top box’s component video (Y, P B ,
P R ) and audio (L/R) jacks.
7 CONTROL S
IN/OUT Allows the projection TV to receive (IN) and send (OUT) remote control
signals to other Sony infrared-controlled audio or video components.
8 DIGITAL AUDIO (OPTICAL)
OUT PCM/DOLBY DIGITAL Connect to the optical audio input of an audio component that is Dolby Digital
and PCM compatible.
DIGITAL
AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
1
2
L L
R R
L
R
SUB WOOFER
OUT
AUDIO OUT
FIX VAR
7
9
8
q;
3
4
6 2 1
qa
qs
qd
5