Sanyo VPC E1292 - Manual (Page 57)

Camera Settings 41
The SETUP Menu
Eng
lish
Camera Settings
The SETUP Menu
The SETUP menu, available in capture and playback modes, allows you to configure the camera’s
general settings and according to your preferences.
To access the setup menu:
1. Press the MENU button when in Playback or any of the capture
modes.
2. Select SETUP from the menu. The submenu appears.
3. Use the Left/Right navigation buttons to scroll through the
options and press the OK button to enter further submenus and to
confirm your selection. Refer to the following sections for more
detailed information about each setting.
LCD Brightness
The LCD BRIGHTNESS setting allows you to brighten or darken the
LCD backlight. Press the OK button to enter. Use the Left/Right
navigation buttons to increase or decrease the brightness.
File Number
The FILE NO. setting allows you to reset the file number to 0001 when
the camera creates a new folder. Otherwise, the next file number will be
used. Select RESET to reset or CONTINUE to set the file numbers in
continuous order.
OK Enter
SETUP
Press OK to enter
LCD BRIGHTNESS
FILE NO.
RESET
CONTINUE