Using the self-timer and burst photography, Using auto scene mode, Eng lish – Sanyo VPC E1292 User Manual

Page 31

Getting Started 15

Taking your First Photo

Eng

lish

Using the Self-timer and Burst Photography

The camera comes equipped with a self-timer which allows you to take photos after a pre-defined delay.

The burst photography feature allows you to take multiple consecutive photos by pressing and holding

the Shutter button. The multi-burst photography feature allows you to take multiple (16) consecutive

VGA photos by pressing the Shutter button once.
To set the self-timer/burst mode:

1. Press the Right/

Self-timer/

Burst Mode navigation button to cycle through the self-

timer (

) and burst photography options (

) on the LCD screen.

2. Once you have selected an option, frame and take your shot. In self-timer mode, the icon will

flash until the time expires and the photo is taken.

3. After taking a photo, the Self-timer automatically exit. If you want to use these functions for the

next photo, press the Right/

Self-timer/

Burst Mode navigation button again to

activate the function.

Using Auto Scene Mode

When Auto Scene mode is enabled, the camera will automatically

detect the proper scene modes you may want to switch, such as Auto,

Backlight, Macro, Copy, Landscape, Night Landscape, Portrait, Foliage,

Night Portrait. However, the image resolution and quality, and the

exposure compensation are still controllable in this function.

1. Turn Mode Dial to

Auto Scene mode.

2. The detected scene icon will be displayed on the LCD.

Note:

: Burst Mode

Take photos until shutter is released.

: Multi-Burst Mode

16 photos continuously by 1 press of the Shutter button.

9999

12M