Slideshow, Resize, Slideshow resize – Sanyo VPC E1292 User Manual

Page 50: English

34 Photo, Video & Audio Playback

Using the Playback Menu

English

Slideshow

The SLIDESHOW function allows you to view all stored photos in a

continuous sequence.
To view a slideshow:

1. Press the MENU button to select SLIDESHOW from the menu,

then press the OK button to enter the SLIDESHOW function.

2. Press the Up/Down navigation buttons and the OK button to

select from the available options:

Resize

The RESIZE function allows you to change the image resolution.
To resize a photo:

1. Press the MENU button to select RESIZE from the menu, then

press the OK button to enter the Resize function.

2. Press the Up/Down navigation buttons and the OK button to

select the resize ratio you require: 6 M, 4 M, 2 M, 1 M, and VGA.

3. Select EXIT to return to the main menu.

•START:

Select to start the slideshow.

•INTERVAL: Select to set the interval time between each photo during the slideshow. Use the

Left/Right navigation buttons to set a value in seconds.

•LOOP:

Select to enable/disable a continuous loop of the slideshow. Select On or Off

(default) from the submenu.

•EXIT:

Select to exit to the main menu.

Note:

It is only possible to scale-down image resolutions. If the current image resolution is VGA, this menu

item is disabled in the Resize submenu. The ratio of the image (4:3 or 3:2) remains unchanged after

resizing.

• This function only supports native pictures

• Cropped images cannot be resized

• If there is not sufficient storage space, images cannot be resized

• If the SD/SDHC card is locked, images cannot be resized

• VGA images cannot be resized

START

INTERVAL
LOOP
EXIT

SLIDESHOW

12M

1/140

5 SEC

OFF

6 M

4 M
2 M
1 M

RESIZE

12M

1/140