Using the aeb (auto exposure bracketing) function, English – Sanyo VPC E1292 User Manual

Page 32

16 Getting Started

Taking your First Photo

English

Using the AEB (Auto Exposure Bracketing) Function

When using the AEB (Auto Exposure Bracketing) function, the camera automatically takes

3 consecutive photos with different exposures by pressing the Shutter button once. For example, when

the current EV compensation value is 0 EV and the AEB bracket interval value is set to ±0.3, the camera

takes shots of the same scene with 3 varying levels of exposure: -0.3 EV, 0 EV and +0.3 EV.
This function is only available in Auto, P-Mode and Macro modes. To set the AEB mode:

1. Press the MENU button to display menu options.
2. Press the Left/Right navigation buttons to select AEB setting.
3. Press the Up/Down navigation buttons to select from the

available options:

•AEB:

Select to enable (ON) or disable (OFF) the AEB

function.

•BRACKET: Select to set the bracket interval value ranging

from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.

•EXIT:

Select to apply new settings to the camera and

return to the SETUP menu.

Note:

1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.

2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.

AEB

BRACKET
EXIT

± 0.3EV