Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 66)

60
MVDS X-1 User's Guide
Configures Static Node control for receivers. Usually, the default settings are used.
Static Node (at receiver)
Name Details
Node
Configuration
Node List Method Specify a node search method.
Switch source interval
Set a time interval to switch the MVDS transmitter
automatically when two or more transmitters are installed
to the network.
Static Node 0
Specify an IP address for node when Node List Method is set
to Static.
Static Node 1
Static Node 2
Static Node 3
Static Node 4
Static Node 5
Static Node 6
Static Node 7
- Use this only for irregular situations such as when you need to specify a node for your
network environment or you need to switch the transmitter every certain period of time.
Usually, the default settings are used.
Use this when you specify the contents (transmitter) or switch it every certain period of time.
Use this when you switch the group manually.
Note