Sanyo PLC WTC500L - Manual (Page 29)

29
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Press the Point 7 8 buttons to switch the mute function
On/Off. When the sound is turned off, “On” is displayed.
Press the Point 7 8 buttons again to turn the sound back
on.
Use the Point ed buttons to move the red frame
pointer to the desired item, and then press the SELECT
button.
Approximate level of
the volume.
Exit the Sound Menu.
Approximate level
of the volume.
Press the MUTE button to set the Mute function
On or Off. The dialog box disappears after 4
seconds.
Sound Menu
Sound Menu icon
Volume
Remote Control
VOL + button
VOL – button
MUTE button
Volume
Mute
Press the Point 8 button to turn up the volume; press the
Point 7 button to turn down the volume.
Mute
VOLUME +/– buttons
Direct Operation
Menu Operation
Sound Adjustment
Top Control
Volume Dialog Box
Basic Operation