Sprint Nextel SCP-7050 - Manual (Page 149)

Section 2H: Using Your Phone’s Voice Services 133
V
oic
e S
er
vic
es
Using Voice-Activated Dialing
In addition to Sprint Voice Command (see page 225), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
With the phone open:
1. Press and hold , , or .
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
With the phone closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
Programming Voice Dial Tags
To program a voice dial tag:
1. Select a Contacts entry to which you would like to add a
voice dial tag and press
. (See “Finding Contacts
Entries”on page 107.)
2. Select a phone number, and then select Options (right
softkey) > SetVoice Tag > Add.
Note: To use the Voice Dial function, you must have a stored entry
for
Voice Dial . (See “Programming Voice Dial Tags”below.)
Note: Please set the Voice Prompt feature (see page 53) to On before
using the Voice-Activated Dialing so that you can hear the
voice instruction from the phone. The default setting is
Off .