Sony CDX-C8850R - Manual (Page 38)

38
GB
Playing the specific tracks only
You can select:
•Bank on - to play the tracks with the “Play”
setting.
•Bank inv (Inverse) - to play the tracks with
the “Skip” setting.
1
During playback, press (SHIFT), then
press (4) (PLAY MODE) repeatedly until
“Bank” appears.
2
Press (5) (t) to repeatedly until the
desired setting appears.
B Bank on B Bank inv B Bank off
Playback starts from the track following the
current one.
3
Press (SHIFT).
To return to normal play mode, select “Bank
off” in step 2 above.
Selecting specific tracks
for playback
— Bank (CD unit with the custom file
function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (4) (PLAY MODE) for two
seconds.
Bank edit mode.
Note
If you have not labelled the disc, the bank edit
mode does not appear and the programme
edit mode appears. To return to normal
playback mode, press (4) (PLAY MODE) for
two seconds.
2
Push the SEEK/AMS control up or down
to select the track number you want to
skip and press (6) (ENTER).
The indication changes from “Play” to
“Skip.” To return the indication to“Play,”
press (6) (ENTER) again.
3
Repeat step 2 to set the “Play” or “Skip”
mode on all the tracks.
4
Press (4) (PLAY MODE) for two seconds.
The unit returns to normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the “Play” and “Skip” mode for up
to 24 tracks.
• You cannot set the “Skip” mode for all the
tracks.