Sony CDX-C8850R - Manual (Page 30)

30
Changing the sound and
display settings
The following items can be set:
•Clock (page 7).
•CT (Clock Time) (page 20).
•D.Info (Dual Information) - to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•SA (Spectrum Analyzer)-to change the
display pattern of the equalizer display.
•Amber/Green - to change the illumination
colour to amber or green.
•Dimmer - to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast - to adjust the contrast if the
indications in the display are not
recognisable because of the unit’s installed
position.
•Voice guide function for vocalised
comments.
— Select “Voice 1” to minimise the volume
of the guide.
— Select “Voice 2” to increase the volume
than “Voice 1.”
— Select “Voice 3” to maximise the volume
of the guide.
— Select “Voice off” to deactivate Voice
guide.
•Beep - to turn on or off the beeps.
•RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander in the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•M.dspl (Motion Display) - to turn the motion
display to 1, 2, or Off.
•English/Spanish - to change the vocalised
comments of the voice guide and the display
language to English or Spanish.
•A.Scrl (Auto Scroll) (pages 9, 32)
Attenuating the sound
Press (ATT) on the rotary commander or
optional wireless remote.
“ATT on” appears momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).