Sony CDX-C8850R - Manual (Page 32)

32
GB
To locate succeeding
tracks
To locate preceding
tracks
To search forward
To search backward
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down once for each track
you want to skip.
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold.
Release when you have found the
desired point.
Locating a disc by disc number
— Direct Disc Selection
Press the number button ((1) to (10))
that corresponds with the desired disc
number.
The desired disc in the current unit begins
playback.
After if you select the desired item, the display
will be automatically change to the Motion
Display mode after about a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
”Changing the sound and display settings” on
page 30).
You can label CD and CD TEXT discs with a
personalised name using the disc memo
function, refer to “Labelling a CD” (page 36).
However, if you use personalised labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
Tips
•
If the name of the MD or CD TEXT disc is too
long, you can scroll it across the display by
pressing (SHIFT), then (2) (T).
•
If you want to display the original CD TEXT
information after labelling the CD TEXT disc with
a personalised name, press (SHIFT) , then (5)
(t).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD TEXT disc or MD exceeds 10 characters
and the Auto Scroll function is on, the
following automatically scrolls on the display:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL/SA) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (SHIFT).
2
Press (3) (SET UP) repeatedly until
“A.Scrl” appears.
3
Press (5) (t) to select “A.Scrl on.”
4
Press (SHIFT).
To cancel Auto Scroll, select “A.Scrl off” in
step 3 above.
Note
For some CD TEXT discs with a lot of characters,
the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.