Sony CDX-C8850R User Manual
Page 11
11
GB
Playing the stored programme
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
“PGM” appears.
3
Press (5) (t) repeatedly until “PGM on”
appears.
Programme Play starts.
4
Press (SHIFT).
To return to the normal playback mode, select
“PGM off” in step 3 above.
Note
“Not ready” appears in the display if a disc that
has no programmed tracks is inserted.
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2
Press (2) (T) repeatedly until “DEL”
appears.
3
Press (6) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
Track slot number
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2
Press (2) (T) or (5) (t) to select the
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
5
To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 24 slots have been filled, “*Mem
Full*” appears in the display, and you cannot
insert more tracks.
6
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
7
Press (SHIFT).