Samsung WB5500 - Manual (Page 61)

060
Image Stabilization
This feature allows you to minimize camera
shake while taking a picture.
[OIS] ( ) : Performs optical image stabilization.
[DUAL IS] ( ) : Performs optical image stabilization and digital image
stabilization simultaneously.
Ŷ Things to watch out for using the DUAL IS mode
– The digital zoom will not operate in the DUAL IS mode.
–
If the lighting conditions are brighter than fl uorescent lighting condi-
tions, the DUAL IS will not activate.
– If the lighting conditions are darker than fl uorescent lighting conditions,
camera shake warning indicator ( ) will be displayed. For best results
only take pictures in situations where the camera shake warning
indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
–
As the DUAL IS uses the camera’s digital signal processor, it may take
a little longer for the camera to process and save the images.
å OIS function may not work suffi ciently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher zoom values.
- When camera shake is beyond the camera-shake correction
range.
- When the shutter speed is slow.
- When the battery is low.
å If you operate OIS function using a tripod, the image can be
blurred by the vibration of the sensor of the OIS. Turn off the OIS
function when you use a tripod.
å If the camera is subjected to an impact, the LCD monitor can be
affected. To make the camera function properly again, turn it on
and off.
Shooting ( )
Image Stabiliser
Back Move