Samsung WB5500 - Manual (Page 49)

048
ISO
[Auto] : The camera's sensitivity is automatically changed by
variables such as lighting value or subject brightness.
[ISO 80, 100, 200, 400, 800, 1600, 3200, 6400] :
You can increase the shutter speed while the same amount of light
is present, by increasing the ISO sensitivity. However, the image
may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light
and therefore the greater its capacity to take pictures in dark condi-
tions. However, the noise level in the image will increase as the ISO
value increases, making the image appear coarse.
Ä When [Motion Capture] is set, ISO speed will be set to Auto.
Ä ISO setting is available in the [Program], [Aperture. Shutter
Priority] and [Manual] modes.
Ä When you set the ISO speed to 6400, you can select only 3M or
lower resolution.
You can select the ISO sensitivity when
taking pictures.The speed or specifi c
light-sensitivity of a camera is rated by
ISO numbers.
Shooting ( )
Fine-tuning the white balance
Press the UP/DOWN/LEFT/RIGHT buttons
to adjust the desired white balance.
Seven levels (196 patterns) are available on
the G-M and B-A axis.
• G: Green
• A: Amber
• M: Magenta
• B: Blue
ISO
Back Move
Back Move