Smeg SE365MF-5 - Manual (Page 10)

40
Instructions for the User
7.2 Semiautomatic cooking
This function only switches the oven off automatically at the end of the
cooking time.
Press the key and the display will light up showing the figures ;
keep it pressed, and at the same time use the value modification keys
or to set the cooking duration.
A few seconds after the key is released, the count of the programmed
cooking duration will start and the display will show the current time
together with the symbols A and .
7.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the key and the display will light up showing the figures ;
keep it pressed, and at the same time use the value modification keys
or to set the cooking duration.
Press the key and the display will show the sum of the current time plus
the cooking duration just set: keep it pressed and at the same time use the
value modification keys or to adjust the end of cooking time.
A few seconds after the key is released, the programmed count will
start and the display will show the current time together with the symbol A.
When the cooking start time calculated automatically by the programmer
on the basis of the data entered is reached, the display will show the A
and symbols together.
After the setting, to view the cooking time left press the key; to view the
end of cooking time press the key.
The logic prevents the setting of incompatible values (e.g. the programmer
will not accept an end of cooking time with a duration which is too long for
this value).
7.4 Minute minder
The programmer can also be used as an ordinary minute minder. Press
the key and the display will show the figures ; keep it pressed
and simultaneously press the value modification keys or . When the
key is released the programmed count will start and the display will show
the current time and the symbol .