Skm 300 radio microphone – Sennheiser EvolutionWireless EW 300 Series User Manual
Page 22
Using the devices
20
SKM 300 radio microphone
To switch the radio microphone
on
(online operation):
To switch the radio microphone
off
:
̈
If necessary, deactivate the lock mode (see page 21).
To switch the radio microphone
on
and to
deactivate the RF signal on switch-on
(offline
operation):
̈
Briefly press the
ON
/
OFF
button
Ƹ
.
The radio microphone transmits an RF signal. The transmission icon
ብ
is
displayed.
The red
ON
LED
µ
lights up and the standard display “
Frequency/Name
”
appears on the display panel. The
MIC
button
You can switch the radio microphone on and
deactivate the RF signal on switch-on
.
For more information, see below.
̈
Press the
ON
/
OFF
button
Ƹ
until “
OFF
” appears on the display panel. The red
ON
LED
µ
goes off. The
MIC
goes off. The display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
Ƹ
cancel your entry (ESC
function) and return you to the current standard display.
̈
Press the
ON
/
OFF
button
Ƹ
until “
RF Mute On?
” appears on the display panel.
̈
Press the multi-function switch
¹
.
The transmission frequency is displayed but the radio microphone does not
transmit an RF signal. The transmission icon
ብ
is not displayed and the
MIC
button does not light up. When the pilot tone function is activated on both radio
microphone and receiver, “
RF Mute
” appears on the receiver’s display panel.
Use this function to save battery power or to prepare a radio microphone for use
during live operation without causing interference to existing transmission links.
Ƹ
µ
»
ON/OFF
ON/OFF
ON/OFF
MHz
543.200
ew300 G3
MUTE
P
AF
ብ