Sunfire Theater Grand Receiver TGR-401-230 - Manual (Page 20)

User's Manual
0
CHAPTER 2
Front Panel Input Connections
The front panel input section is the
ideal place to make quick connec-
tions to equipment such as gaming
consoles or video cameras. There is
also a connection for the microphone
used in the auto-setup and auto-EQ
procedures.
Using the MODE switch, the three
front panel RCA input jacks can
quickly be configured as component
video inputs, or left and right analog
audio and composite video inputs.
For component video connections,
press the MODE switch until the LED
next to it turns on. Then connect the
component video outputs from your
gaming console or other equipment, to
the TGR-401 front RCA inputs. To get
audio in, use the digital optical input.
If your video camera has left/right
analog audio connections and com-
posite video, you can connect it as
shown below.
Press the MODE switch until the
LED next to it turns off.
The mode can also be changed us-
ing the remote control FTRMD button
in TG401 and Zone2.
Video Connections
From: Game Console component
video outputs
To: TGR-401 Front component
video inputs
Audio Connections
From: Game Console digital
optical output
To: TGR-401 Front digital
optical input
Video Connections
From: Camera composite video
output
To: TGR-401 Front composite
video input
Audio Connections
From: Camera left and right analog
audio outputs
To: TGR-401 Front left and right
analog audio inputs
Component video inputs
or L/R audio and com-
posite video, depending
on the MODE button
MODE
button
and
LED
Optical
Input
S-Video
Input Mic Input
Component Video with Digital Audio
Left/Right Analog Audio and Composite Video