Sunfire Theater Grand Receiver TGR-401-230 - Manual (Page 13)

User's Manual
13
CHAPTER 1
with its own surround decoder.
You can select this as an input
from the front panel or remote
control. The eight channels of
analog audio will then pass into
the TGR-401.
Note: if you use HD-DVD or Blu-
ray DVD players that have 7.1
analog audio outputs, use this 8-
channel input. It is fully processed
in DSP with bass management,
speaker delays and tone controls.
Only the left/right jacks are avail-
able in Zone 2.
10. Digital Connections
There are four S/PDIF digital
coaxial inputs, with one coaxial
output, and four digital optical
inputs with one optical output.
Use these with source equipment
that has digital audio connections.
11. TP1 and TP2
Optional Olé-2SF Film Interac-
tive touchpads are available for
external control of Zone 2 or the
Main Zone.
These wall-mounted touchpads
connect to TP1 or TP2 using stan-
dard CAT-5 cable.
Please contact your Sunfire
dealer for more information. Use
only touchpads that are recom-
mended by Sunfire.
Do not connect these ports
to Ethernet or other com-
puter networks.
12. RS-232 Port
This communications port allows
future updates of the software
from Sunfire to be made to your
TGR-401. It may also be used for
control by 3rd party integration
systems.
13. VIA!migo Port
This port allows connection of a
proprietary VIA!migo iPod dock-
ing station system available from
Sunfire.
Do not connect this port to
Ethernet or other computer
networks.
14. Infrared (IR)
These inputs and outputs are
used in custom installations to
control the Main Zone and Zone 2
from a remote location. The input
and output accept 1/8” mono
mini-jacks from standard remote
control IR equipment, such as
those made by Xantech and other
companies. There is also a screw
terminal output for bare wire con-
nections. The remote sensors
can be in a different room, or your
main room.
15. Trigger Outputs
These allow the TGR-401 to con-
trol the turn-on of other trigger-en-
abled equipment in your system.
16. IEC Linecord Socket
The TGR-401 comes with a
detachable linecord that connects
here.
Plug the linecord into an AC
wall socket or power strip that
is correctly configured with
the voltage specified for your
model.
17. AC Line Fuse
Always unplug the linecord
from the AC Mains before
checking or changing the
fuse. If this fuse blows, you
must replace it with a fuse of
exactly the same size and current
rating.
18. Power Switch
If this is switched off, the TGR-401
will be off, and cannot be turned
on even with the front panel
power switch, the remote control,
or optional Olé-2SF touchpads.
In normal operation, leave this
switch on. Turn it off if you will not
be using the TGR-401 for extend-
ed periods.