Samsung Digimax A402 - Manual (Page 99)

《99》
Removable Disk
■ To use this camera as a Removable Disk, install (p.89) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM → 100SSCAM) can be transferred to the
PC.
Important information whilst using the Removable Disk
● The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
● We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
● When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
● When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing
is displayed in THUMBNAIL mode.
● The camera status lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until the
lamp stops blinking.
To remove the USB cable in Windows 2000/ME/XP,
use the [Unplug or Eject Hardware] icon on the task
bar.
INFORMATION