Samsung Digimax A402 - Manual (Page 23)

《23》
Using the camera buttons to adjust the camera
■ The RECORDING mode function can be set up by using the camera buttons.
● Used for turning the camera’s power on / off.
● If this camera isn’t operated during the specified time(about
60 SEC.), the camera power will be idle(LCD monitor :
OFF, Camera status lamp : ON ) automatically.
To use the camera again, press any of the camera buttons
except the power button. If there is no operation during the
specified time after the idle mode, the camera power will
be turned off automatically to save battery life. Refer to page 70 for more information about
the auto power off function.
POWER button
● Used for taking an image or recording voice in the
RECORDING mode.
● In MOVIE CLIP mode
Pressing the shutter button down fully starts the process
for recording a movie clip. Press the shutter button once
and the movie clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop
recording, press the shutter button again.
● In STILL IMAGE mode
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after the camera has finished
storing the image data.
SHUTTER button