Samsung Digimax A402 - Manual (Page 43)

《43》
Save / Load the camera configuration (MYSET)
1. Press the MENU button and select [MYSET] menu by
pressing the LEFT/RIGHT button.
2. Press the UP/DOWN buttons to select the [SAVE] menu
and press the right button.
3. Press the UP/DOWN buttons to select desired MYSET
slot number to save.
4. Press the OK button to save the current configuration in
the selected MYSET slot.
■ Use the MYSET mode to save frequently used camera settings (SAVE) and use it later
(LOAD)
[ PROGRAM mode ]
2048
◀ ▶
MYSET
LOAD
SAVE CANCEL
MYSET
MOVE: CHANGE: ▶ ▲
▼
[ PROGRAM mode ]
2048
◀ ▶
MYSET
LOAD
SAVE CANCEL
MYSET
▲
▼
● Loading the saved camera configuration: available in the PROGRAM mode.
1. Press the MENU button and select [MYSET] menu by
pressing the LEFT/RIGHT button.
2. Press the UP/DOWN buttons to select the [LOAD] menu
and press the right button.
3. Press the UP/DOWN buttons to select desired MYSET
slot number to load.
4. Press the OK button to set the camera configuration as
saved in the MYSET slot.
* The current MYSET slot number is displayed in the top
left of the LCD.
* If you select [CANCEL] in the [LOAD] menu or turn on and off the camera in the MYSET
mode, the MYSET mode will be cancelled.
● Saving the camera configuration: Available in the PROGRAM mode.
MOVE: CHANGE: ▶