Samsung Digimax A402 - Manual (Page 16)

《16》
Instructions on how to use the memory card
■ The camera can use SD Memory Cards and MMC (Multi Media Card).
Mode STILL IMAGE mode MOVIE CLIP mode
Quality / Size 2272(P) 2048 1600(M) 1024 640(E) 640 320
SUPER FINE 10 13 17 38 81 - -
FINE 20 27 37 78 145 - -
NORMAL 33 42 50 113 234 - -
15FPS - - - - - 26SEC 1MIN11SEC
24FPS - - - - - 18SEC 40SEC
● If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
● Don’t remove the memory card when the camera status lamp(Green) is blinking as this
may cause damage to data in the memory card.
INFORMATION
[ SD(Secure Digital) memory card ]
Write protect
switch
Label
Card
pins
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected.
By sliding the switch to the top of the SD
memory card, the data protection will be
cancelled. Slide the switch to the top of the SD
memory card before taking a picture.
■ When using a 16MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.