Samsung Digimax A402 - Manual (Page 33)

《33》
+/- button
[ Image & full information ] [ Image & basic information ] [ LCD off ]
■ You can check the recording status in the LCD monitor.
Pressing the LCD button in the RECORDING (STILL
IMAGE, MOVIE CLIP) mode will change the display as
shown below.
2) Setting up the shutter speed and aperture value
1. In night scene mode, press the +/- button.
A screen appears as shown to the right.
2. Use the LEFT and RIGHT buttons to set the shutter
speed. Use the UP and DOWN buttons to set the
aperture value.
3. Press the +/- button again. The value you set will be
saved and the mode will switch to Night scene mode.
Press the SHUTTER button to take the picture.
■ If the LCD monitor is turned off, the camera status lamp will light up.
Pressing the
LCD button
Pressing the
LCD button
Pressing the LCD button
LCD button