Samsung Digimax A402 - Manual (Page 39)

《39》
Metering
■ If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
[MULTI]( ) : Exposure will be calculated based on
an average of the available light in the
image area. However, the calculation
will be biased towards the centre of
the image area. This is suitable for
general use.
[ PROGRAM mode ]
2048
◀ ▶
METERING
MULTI
SPOT
NOR 2272
● If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
INFORMATION
[ Spot metering zone ]
[SPOT] ( ) : The indicated area at the center will
be metered, as shown on the right.
This is suitable when the subject at
the center is exposured correctly
regardless of back lighting.