Samsung Digimax A402 - Manual (Page 26)

《26》
Flash ( ) / Left button
[Selecting the auto flash]
● Flash range
■ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to the left
tab.
■ When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH ( ) button.
● Selecting the flash mode
1. Select the STILL IMAGE mode by pressing the mode
button.
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD
monitor. Use the correct flash to suit the environment.
● Using the flash frequently will reduce the life of the batteries.
● Under normal operating conditions the charging time for the flash is normally within 5
seconds. If the batteries are weak, the charging time will be longer.
● During the continuous shot, movie clip mode, the flash function will not operate.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or highly reflective.
INFORMATION
Focus type Flash range
Auto 1.0m ~ 2.5m
Macro 0.2m