SVAT Electronics CV501 - 16CH - Manual (Page 14)

14 CV501 - 16CH
5. Connect the male RCA plug from the 60 ft cable to the BNC to RCA
connector.
6. Repeat the above steps for all of the included cameras .
Note: For detailed instructions and information on the
cameras included with this system, please refer to the
Camera specifications on Pg. 63.
CONNECTING A USB MOUSE
It is recommended to connect the included USB mouse before powering on the DVR. This will speed up the initializing process as well as make the DVR easier
to use.
1. Plug the USB connection on the mouse into the USB connection on the front right of the DVR.
Note: This Manual was written with the mouse being the main tool for navigation.
This DVR has multiple connections which allow you to integrate additional SVAT or third party devices to the system. Please note that there
are many makes and models of compatible devices and the instructions below may not be applicable to your device. Always refer to the device
instruction manual for proper setup and operation.
CONNECTING ADDITIONAL DEVICES TO THE DVR
CAMERA INSTALLATION...continued