Sharp AR-810 - Manual (Page 132)

1
2
3
4
5
6
7
8
9
10
11
12
6-12
SELECTING FINISHING MODES
Setting the Inserter (Cont.)
6. INSERTER MODE (OPTIONAL)(Cont.)
Sheet Insertion
10 Key in the page number where you wish to insert
the sheet, and press the upper SET key.
- When two or more sheets are inserted, repeat this proce-
dure. Up to 15 insert locations can be specified in a single
copy job.
9 Press the SHEET INSERT key.
11 When specifying the page number is completed,
press the lower SET key.
- For combining it with the cover sheet insertion of top
cover (or top & back cover insert), press the TOP COVER
(or TOP & BACK COVER INSERT ) key before pressing
the lower SET key.
12 Press the START key.
Select other copy modes as required.
Insertion of a blank sheet prior to the selected page