Scanner emulation parameter defaults, Scanner emulation parameter defaults -4 – Symbol Technologies DS 3408 User Manual

Page 146

Text mode
Original mode

DS 3408 Product Reference Guide

11-4

Scan the Scanner Emulation Host bar code from

Scanner Emulation Host on page 11-6

to enable the Scanner Emulation host

interface.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.

Scanner Emulation Parameter Defaults

Table 11-1

lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in the

Scanner Emulation Host Parameters section beginning on page

11-6

See

Appendix A, Standard Default Parameters

for all user preferences, hosts, symbologies, and

miscellaneous default parameters.

WARNING

Note