Symbol Technologies DS 3408 - Manual (Page 100)

DS 3408 Product Reference Guide 7-18
Host Serial Response Time-out (continued)
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state.
Beep on
When this parameter is enabled, the digital scanner issues a beep when a character is detected on the RS-232 serial line.
is issued to gain a user's attention to an illegal entry or other important event.
Maximum: 9.9 Sec
*
Host: Low RTS
Host: High RTS
Beep On Character
(Enable)
*
Do Not Beep On Character
(Disable)