Woodstock M1039 - Manual (Page 29)

-27-
D('*0()$Jg\\[;i`ccGi\jj
J
M
@:<
J
This section covers the most common service adjustments
or procedures that may need to be made during the life
of your machine.
If you require additional machine service not included
in this section, please contact Woodstock International
Technical Support at (360) 734-3482 or send e-mail to:
k\Z_$jlggfik7j_fg]fo%Y`q.
>\e\iXc
D8B< JLI< k_Xk pfli dXZ_`e\ `j
legcl^^\[ [li`e^ Xcc j\im`Z\ gifZ\$
[li\j @] k_`j nXie`e^ `j `^efi\[# j\i`$
fljg\ijfeXc`ealipdXpfZZli%
The drill press comes fitted with a depth stop to use
when drilling multiple holes at the same depth. The scale
on this depth stop can be calibrated if it ever becomes
incorrect.
KfZXc`YiXk\k_\[\gk_jkfg#[fk_\j\jk\gj1
(% Loosen the lower jam nut and calibration nut shown
in =`^li\*'.
)% Use the calibration nut to zero the depth stop scale
with the depth stop bracket.
*% Hold the depth stop at zero, and tighten the lower
jam nut to hold the depth stop in position.
+% Test the depth stop by measuring how far the spin-
dle actually moves with respect to where you set
the depth stop.
;\gk_Jkfg:Xc`YiXk`fe
=`^li\*'% Depth stop calibration.
Lower
Jam Nut
Calibration
Nut
Depth Stop
Bracket