Woodstock M1039 - Manual (Page 28)

-26-
D('*0()$Jg\\[;i`ccGi\jj
D
8
@EK<
E8E:
<
D8@EK
ClYi`ZXk`fe
Since all bearings are sealed and per-
manently lubricated, simply leave them
alone until they need to be replaced. Do
not lubricate them.
Regular periodic maintenance on your E:AB8AJ ®
Model M1039 will ensure its optimum performance. Make
a habit of inspecting your machine each time you use it.
:_\Zb]fik_\]fccfn`e^Zfe[`k`fejXe[i\gX`ifi
i\gcXZ\n_\ee\Z\jjXip1
› Loose mounting bolts.
› Loose chuck and/or arbor.
› Worn switch.
› Worn or damaged cords and plugs.
› Damaged V-belt.
› Any other condition that could hamper the safe
operation of this machine.
Frequently blow-off sawdust with compressed air. This is
especially important for the internal working parts and
motor. Dust build-up around the motor is a sure way to
decrease its life span.
Occasionally it will become necessary to clean the inter-
nal parts with more than compressed air. To do this,
remove the table top and clean the internal parts with
a citrus cleaner or mineral spirits and a stiff wire brush
or steel wool. Make sure the internal workings are dry
before using the saw again, so that wood dust will not
accumulate. If any essential lubrication is removed dur-
ing cleaning, relubricate those areas.
Tables can be kept rust-free with regular applications
of products like SLIPIT. For long term storage you may
want to consider products like Boeshield T-9.
KXYc\#:fclde#9Xj\
:c\Xe`e^
>\e\iXc
D8B< JLI< k_Xk pfli dXZ_`e\ `j
legcl^^\[ [li`e^ Xcc dX`ek\eXeZ\ gif$
Z\[li\j@]k_`jnXie`e^`j`^efi\[#j\i`$
fljg\ijfeXc`ealipdXpfZZli%
M$9\ckj
Inspect regularly for tension and wear.
Check pulleys to ensure that they are
properly aligned. See
:_Xe^`e^Jg\\[j
on GX^\(0 for more information about
removing/installing belts if you need help
replacing the belts.