Sharp DV-L70BL - Manual (Page 76)

73 GB
2
Press AUDIO to cycle through the available
channels and select the one you want.
• In the case of a video CD or audio CD,
each press of AUDIO cycles through
the channels in the following sequence:
L+R
→
L
→
R.
Helpful Hints
• With a DVD player, use ' and " to scroll through the channel numbers.
• The channel number selection display remains on the screen for about 10
seconds.
To play DTS/MPEG audio using a DTS/Audio MPEG digital surround
decoder
1
Connect the DVD player to the DTS/Audio MPEG digital surround decoder
(see page 32).
2
Press AUDIO to select the DTS/MPEG mode.
• You must use a DTS digital surround decoder (see page 32) in order to play DTS
audio. Playing back a DTS audio disc on the DVD player alone will not produce
correct audio output, even if you select the DTS mode.
Audio Selection (DVD, Video CD only)
3 / 3 LPCM
L
R