Sharp DV-L70BL - Manual (Page 35)

GB 32
Helpful Hints
• When connecting to audio equipment, we recommend that you set the
“COMPRESSION (Dolby Digital Output Level)” to “OFF” (see page 47).
Digital Connection to an MD to Record a CD
When you are using a digital connection to record the contents of a CD to
an MD, the track numbers of the CD may not match the track numbers
recorded to the MD.
Connecting to Audio Equipment
Playing Dolby Digital (5.1 channel), DTS and MPEG
Version 2.0 audio
• Connecting an amplifier with a Dolby Digital/DTS/Audio MPEG Version 2.0
digital surround processor or a Dolby Digital/DTS/Audio MPEG Version 2.0
digital surround decoder to your DVD player’s optical digital jack provides richer,
more powerful audio play.
• To use DTS digital surround, use the Disc Menu (page 78) or press AUDIO
(page 72) to select DTS audio.
2 4 6
VOLUME VIDEO AUDIO
DIGITAL OUT (OPTICAL)
PHONES
MAX MIN
Dolby Digital (5.1ch)/DTS/
Audio MPEG Version 2.0
processor or amplifier
To optical
digital output
jack
Optical digital
cable
(commercially
available)
To optical
digital
input jack
DIGITAL OUT (OPTICAL)
• You need to purchase a
commercially available optical
digital cable to make the
connection described here.
• This connection is not possible
if the processor or amplifier to
which you want to connect
does not have an optical
digital input jack.
• Refer to the operation manual
for the processor or amplifier
for information about
connecting to it.