Sharp DV-L70BL - Manual (Page 42)

39 GB
To turn power on and off with the remote control unit
When the main power switch is in the “ON” position, you can turn power off
and on by pressing
OPERATE .
1
Press OPERATE.
• Each press of OPERATE toggles power on and off.
• Pressing OPERATE does not turn on power if the main power switch is
in the “OFF” position.
• After DVD player power is turned off using OPERATE , the power/
standby lamp is red to indicate the DVD player is in the Standby mode.
Standby mode
In the Standby mode, the power/standby lamp is red, regardless of whether
the display panel is open or closed. The DVD player goes into the Standby
mode when either of the following happens.
• When you press OPERATE
• When disc play is stopped for about five minutes in the DVD mode
To restore full power from the Standby mode, press RETURN on the player,
slide the main power switch to the “OFF” position and then back to “ON” again,
or press
OPERATE .
Turning Power On and Off
OPERATE
TITLE ENTER
MENU
RESUME STOP STILL/PAUSE
REPEAT
PROGRAM
DIRECT CLEAR MEMORY
SKIP PLAY SKIP
SLOW FWD REV DISPLAY
RETURN
VIRTUAL
BACKLIGHT
HI/LOW/OFF
VIEW
MODE
DIGITAL
GAMMA
DIGITAL
S.PICTURE
VIDEO
ADJUST
OPERATE
VO LU ME
VI DE O
AU DI O
OP TIC AL A NA LO G
PH ON ES
MA X
MIN
ON/S
TAN DBY
INPUT/
DVD BACKLIGHT HI/LOW/OFF
VIEW MODE SKIP
PLAY/GUI
SKIP
STOP
TITLE
MENU ENTER
RETURN
OPEN
STILL/P
AUSE
Power/standby lamp
RETURN